With the Becsor MP-1E Kit you can remotely control your camera's pan/tilt from across the room. Included in this kit is a Bescor MP-101 motorized head which will pan/tilt cameras weighing up to 6 pounds, an AC adapter to provide power to the MP-101 head, and a 20' extension cable for the remote control included with the MP-101 head. See below for more information on the individual items in this kit.
MP-101 Motorized Pan & Tilt Head
The Bescor MP-101 Motorized Pan & Tilt Head attaches between a tripod and camera and enables remote panning and tilting of the camera. Two independent motors smoothly operate horizontal and vertical motion at adjustable speeds. The head supports payloads up to 6 lb. The two mounting points are the 1/4"-20 tripod threads underneath and the 1/4"-20 camera mounting screw with registration pin on top. All tripods and cameras are compatible.
An Auto Pan Mode allows for continuous panning motion, and a switch selector lets you assign end points at 45°, 90°, or 340°. The maximum horizontal angle is ±170 degrees, and the maximum vertical angle is ±15 degrees. This head can be powered by four AA batteries, the Bescor PS-260 AC power supply, or a Bescor 90-645 external battery, all sold separately.
- Enables panning and tilting of a camera remotely at adjustable speeds
- Attaches between a tripod and camera
- 1/4"-20 threads for tripod, 1/4"-20 screw mount for camera
- 6 lb payload
- Remote control included
PS-260 AC Power Supply for MP-101 Motorized Pan Head
The Bescor PS-260 AC Power Supply for MP-101 Motorized Pan Head features a 120-240VAC, 60/50Hz input and 6VDC, 700mA output. It can be used worldwide with an appropriate adapter, sold separately.
RE-20 20' Extension Cord for MP-101 Pan Head Remote Control
The Bescor RE-20 extension affords 20' (609.6 cm) of additional separation from the MP-101 remote pan head to its remote control.
